Drill

A drill or drill motor is a tool fitted with a cutting tool attachment or driving tool attachment, usually a drill bit or driver bit, used for drilling holes in various materials or fastening various materials together with the use of fasteners. The attachment is gripped by a chuck at one end of the drill and rotated while pressed against the target material. The tip, and sometimes edges, of the cutting tool does the work of cutting into the target material. This may be slicing off thin shavings (twist drills or auger bits), grinding off small particles (oil drilling), crushing and removing pieces of the workpiece (SDS masonry drill), countersinking, counterboring, or other operations.

Drills are commonly used in woodworking, metalworking, construction and do-it-yourself projects. Specially designed drills are also used in medicine, space missions and other applications. Drills are available with a wide variety of performance characteristics, such as power and capacity.

History
The earliest drills were bow drills which date back to the ancient Harappans and Egyptians. The drill press as a machine tool evolved from the bow drill and is many centuries old. It was powered by various power sources over the centuries, such as human effort, water wheels, and windmills, often with the use of belts. With the coming of the electric motor in the late 19th century, there was a great rush to power machine tools with such motors, and drills were among them. The invention of the first electric drill is credited to Arthur James Arnot and William Blanch Brain, in 1889, at Melbourne, Australia. Wilhelm Fein invented the portable electric drill in 1895, at Stuttgart, Germany. In 1917, Black & Decker patented a trigger-like switch mounted on a pistol-grip handle.

Types
There are many types of drills: some are powered manually, others use electricity (electric drill) or compressed air (pneumatic drill) as the motive power, and a minority are driven by an internal combustion engine (for example, earth drilling augers). Drills with a percussive action (hammer drills) are mostly used in hard materials such as masonry (brick, concrete and stone) or rock. Drilling rigs are used to bore holes in the earth to obtain water or oil. Oil wells, water wells, or holes for geothermal heating are created with large drilling rigs. Some types of hand-held drills are also used to drive screws and other fasteners. Some small appliances that have no motor of their own may be drill-powered, such as small pumps, grinders, etc.

Hand tools

A variety of hand-powered drills have been employed over the centuries. Here are a few, starting with approximately the oldest:
Bow drill
Brace and bit
Gimlet
Breast drill, also known as "eggbeater" drill
Push drill, a tool using a spiral ratchet mechanism
Pin chuck, a small hand-held jewellers drill

Pistol-grip (corded) drill
Drills with pistol grips are the most common type in use today, and are available in a huge variety of subtypes. A less common type is the right-angle drill, a special tool used by tradesmen such as plumbers and electricians.

For much of the 20th century, many attachments could commonly be purchased to convert corded electric hand drills into a range of other power tools, such as orbital sanders and power saws, more cheaply than purchasing conventional, self-contained versions of those tools (the greatest saving being the lack of an additional electric motor for each device). As the prices of power tools and suitable electric motors have fallen, however, such attachments have become much less common. A similar practice is currently employed for cordless tools where the battery, the most expensive component, is shared between various motorised devices, as opposed to a single electric motor being shared between mechanical attachments.

Hammer drill
The hammer drill is similar to a standard electric drill, with the exception that it is provided with a hammer action for drilling masonry. The hammer action may be engaged or disengaged as required. Most electric hammer drills are rated (input power) at between 600 and 1100 watts. The efficiency is usually 50-60% i.e. 1000 watts of input is converted into 500-600 watts of output (rotation of the drill and hammering action).

The hammer action is provided by two cam plates that make the chuck rapidly pulse forward and backward as the drill spins on its axis. This pulsing (hammering) action is measured in Blows Per Minute (BPM) with 10,000 or more BPMs being common. Because the combined mass of the chuck and bit is comparable to that of the body of the drill, the energy transfer is inefficient and can sometimes make it difficult for larger bits to penetrate harder materials such as poured concrete. The operator experiences considerable vibration, and the cams are generally made from hardened steel to avoid them wearing out quickly. In practice, drills are restricted to standard masonry bits up to 13 mm (1/2 inch) in diameter. A typical application for a hammer drill is installing electrical boxes, conduit straps or shelves in concrete.

In contrast to the cam-type hammer drill, a rotary/pneumatic hammer drill accelerates only the bit. This is accomplished through a piston design, rather than a spinning cam. Rotary hammers have much less vibration and penetrate most building materials. They can also be used as "drill only" or as "hammer only" which extends their usefulness for tasks such as chipping brick or concrete. Hole drilling progress is greatly superior to cam-type hammer drills, and these drills are generally used for holes of 19 mm (3/4 inch) or greater in size. A typical application for a rotary hammer drill is boring large holes for lag bolts in foundations, or installing large lead anchors in concrete for handrails or benches.

A standard hammer drill accepts 6 mm (1/4 inch) and 13 mm (1/2 inch) drill bits, while a rotary hammer uses SDS or Spline Shank bits. These heavy bits are adept at pulverising the masonry and drill into this hard material with relative ease.

However, there is a big difference in cost. In the UK a cam hammer typically costs £12 or more, while a rotary/pneumatic costs £35 or more. In the US a typical hammer drill costs between $70 and $120, and a rotary hammer between $150 and $500 (depending on bit size). For DIY use or to drill holes less than 13 mm (1/2 inch) in size, the hammer drill is most commonly used.
Rotary hammer drill
The rotary hammer drill (also known as a rotary hammer, roto hammer drill or masonry drill) combines a primary dedicated hammer mechanism with a separate rotation mechanism, and is used for more substantial material such as masonry or concrete. Generally, standard chucks and drills are inadequate and chucks such as SDS and carbide drills that have been designed to withstand the percussive forces are used. Some styles of this tool are intended for masonry drilling only and the hammer action cannot be disengaged. Other styles allow the drill to be used without the hammer action for normal drilling, or hammering to be used without rotation for chiselling.

Cordless drills
A cordless drill is an electric drill which uses rechargeable batteries. These drills are available with similar features to an AC mains-powered drill. They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them. Also available are right angle drills, which allow a worker to drive screws in a tight space. While 21st century battery innovations allow significantly more drilling, large diameter holes (typically 12–25 mm (0.5–1.0 in) or larger) may drain current cordless drills quickly.

For continuous use, a worker will have one or more spare battery packs charging while drilling, and quickly swap them instead of having to wait an hour or more for recharging, although there are now Rapid Charge Batteries that can charge in 10–15 minutes.

Early cordless drills used interchangeable 7.2 V battery packs. Over the years battery voltages have increased, with 18 V drills being most common, but higher voltages are available, such as 24 V, 28 V, and 36 V. This allows these tools to produce as much torque as some corded drills.

Common battery types of are nickel-cadmium (NiCd) batteries and lithium-ion batteries, with each holding about half the market share. NiCd batteries have been around longer, so they are less expensive (their main advantage), but have more disadvantages compared to lithium-ion batteries. NiCd disadvantages are limited life, self-discharging, environment problems upon disposal, and eventually internally short circuiting due to dendrite growth. Lithium-ion batteries are becoming more common because of their short charging time, longer life, and low weight. Instead of charging a tool for an hour to get 20 minutes of use, 20 minutes of charge can run the tool for an hour. Lithium-ion batteries also have a constant discharge rate. The power output remains constant until the battery is depleted, something that nickel-cadmium batteries also lack, and which makes the tool much more versatile. Lithium-ion batteries also hold a charge for a significantly longer time than nickel-cadmium batteries, about two years if not used, vs. 1 to 4 months for a nickel-cadmium battery. There are three major drawbacks to Lithium Ion batteries:
They do not perform well in low temperatures
The batteries are very expensive to replace
The overall batteries can only handle about 1/3 of the recharges over a lifetime as a NiCad or NiMH battery.

Drill press



A drill press (also known as pedestal drill, pillar drill, or bench drill) is a fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base, column (or pillar), table, spindle (or quill), and drill head, usually driven by an induction motor. The head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis of the column. The table can be adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on the operator to lift and reclamp the table in position. The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular to the column. The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle to the closest edge of the pillar. For example, a 16-inch (410 mm) drill press has an 8-inch (200 mm) throat distance.

A drill press has a number of advantages over a hand-held drill:
Less effort is required to apply the drill to the workpiece. The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage
The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure
The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently
Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.

For most drill presses—especially those meant for woodworking or home use—speed change is achieved by manually moving a belt across a stepped pulley arrangement. Some drill presses add a third stepped pulley to increase the number of available speeds. Modern drill presses can, however, use a variable-speed motor in conjunction with the stepped-pulley system. Medium-duty drill presses such as those used in machine shop (tool room) applications are equipped with a continuously variable transmission. This mechanism is based on variable-diameter pulleys driving a wide, heavy-duty belt. This gives a wide speed range as well as the ability to change speed while the machine is running. Heavy-duty drill presses used for metalworking are usually of the gear-head type described below.

Drill presses are often used for miscellaneous workshop tasks other than drilling holes. This includes sanding, honing, and polishing. These tasks can be performed by mounting sanding drums, honing wheels and various other rotating accessories in the chuck. This can be unsafe in some cases, as the chuck arbor, which may be retained in the spindle solely by the friction of a taper fit, may dislodge during operation if the side loads are too high.

Geared head drill press

A geared head drill press is a drill press in which power transmission from the motor to the spindle is achieved solely through spur gearing inside the machine's head. No friction elements (e.g., belts) of any kind are used, which assures a positive drive at all times and minimizes maintenance requirements. Gear head drills are intended for metalworking applications where the drilling forces are higher and the desired speed (RPM) is lower than that used for woodworking.

Levers attached to one side of the head are used to select different gear ratios to change the spindle speed, usually in conjunction with a two- or three-speed motor. Most machines of this type are designed to be operated on three phase power and are generally of more rugged construction than equivalently sized belt-driven units. Virtually all examples have geared racks for adjusting the table and head position on the column.

Geared head drill presses are commonly found in tool rooms and other commercial environments where a heavy duty machine capable of production drilling and quick setup changes is required. In most cases, the spindle is machined to accept Morse taper tooling for greater flexibility. Larger geared head drill presses are frequently fitted with power feed on the quill mechanism, with an arrangement to disengage the feed when a certain drill depth has been achieved or in the event of excessive travel. Some gear-head drill presses have the ability to perform tapping operations without the need for an external tapping attachment. This feature is commonplace on larger gear head drill presses. A clutch mechanism drives the tap into the part under power and then backs it out of the threaded hole once the proper depth is reached. Coolant systems are also common on these machines to prolong tool life under production conditions.

Radial arm drill press
A radial arm drill press is a large geared head drill press in which the head can be moved along an arm that radiates from the machine's column. As it is possible to swing the arm relative to the machine's base, a radial arm drill press is able to operate over a large area without having to reposition the workpiece. This saves considerable time because it is much faster to reposition the drill head than it is to unclamp, move, and then re-clamp the workpiece to the table. The size of work that can be handled may be considerable, as the arm can swing out of the way of the table, allowing an overhead crane or derrick to place a bulky workpiece on the table or base. A vise may be used with a radial arm drill press, but more often the workpiece is secured directly to the table or base, or is held in a fixture. Power spindle feed is nearly universal with these machines and coolant systems are common. Larger size machines often have power feed motors for elevating or moving the arm. The biggest radial arm drill presses are able to drill holes as large as four inches (101.6 millimeters) diameter in solid steel or cast iron. Radial arm drills are specified by the diameter of the column and the length of the arm. The length of the arm is usually the same as the maximum throat distance. The Radial Arm Drill pictured in this article is a 9-inch column x 3-foot arm. The maximum throat distance of this drill would be approximately 36", giving a swing of 72" (6 feet).

Mill drill
Mill drills are a lighter alternative to a milling machine. They combine a drill press (belt driven) with the X/Y coordinate abilities of the milling machine's table and a locking collet that ensures that the cutting tool will not fall from the spindle when lateral forces are experienced against the bit. Although they are light in construction, they have the advantages of being space-saving and versatile as well as inexpensive, being suitable for light machining that may otherwise not be affordable.

Lathe

A lathe is a machine tool which rotates the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation with tools that are applied to the workpiece to create an object which has symmetry about an axis of rotation.

Lathes are used in woodturning, metalworking, metal spinning, and glassworking. Lathes can be used to shape pottery, the best-known design being the potter's wheel. Most suitably equipped metalworking lathes can also be used to produce most solids of revolution, plane surfaces and screw threads or helices. Ornamental lathes can produce three-dimensional solids of incredible complexity. The material can be held in place by either one or two centers, at least one of which can be moved horizontally to accommodate varying material lengths. Other workholding methods include clamping the work about the axis of rotation using a chuck or collet, or to a faceplate, using clamps or dogs.

Examples of objects that can be produced on a lathe include candlestick holders, gun barrels, cue sticks, table legs, bowls, baseball bats, musical instruments (especially woodwind instruments), crankshafts and camshafts.

History
The lathe is an ancient tool, dating at least to ancient Egypt and known and used in Assyria and ancient Greece.

The origin of turning dates to around 1300 BC when the Ancient Egyptians first developed a two-person lathe. One person would turn the wood work piece with a rope while the other used a sharp tool to cut shapes in the wood. Ancient Rome improved the Egyptian design with the addition of a turning bow. In the Middle Ages a pedal replaced hand-operated turning, freeing both the craftsman's hands to hold the woodturning tools. The pedal was usually connected to a pole, often a straight-grained sapling. The system today is called the "spring pole" lathe. Spring pole lathes were in common use into the early 20th century.

During the Industrial Revolution, mechanized power generated by water wheels or steam engines was transmitted to the lathe via line shafting, allowing faster and easier work. Metalworking lathes evolved into heavier machines with thicker, more rigid parts. Between the late 19th and mid-20th centuries, individual electric motors at each lathe replaced line shafting as the power source. Beginning in the 1950s, servomechanism were applied to the control of lathes and other machine tools via numerical control, which often was coupled with computers to yield computerized numerical control. Today manually controlled and CNC lathes coexist in the manufacturing industries.

Description
Parts
A lathe may or may not have a stand (or legs), which sits on the floor and elevates the lathe bed to a working height. Some lathes are small and sit on a workbench or table, and do not have a stand.

Almost all lathes have a bed, which is (almost always) a horizontal beam (although CNC lathes commonly have an inclined or vertical beam for a bed to ensure that swarf, or chips, falls free of the bed). Woodturning lathes specialised for turning large bowls often have no bed or tailstock, merely a free-standing headstock and a cantilevered toolrest.

At one end of the bed (almost always the left, as the operator faces the lathe) is a headstock. The headstock contains high-precision spinning bearings. Rotating within the bearings is a horizontal axle, with an axis parallel to the bed, called the spindle. Spindles are often hollow, and have exterior threads and/or an interior Morse taper on the "inboard" (i.e., facing to the right / towards the bed) by which workholding accessories may be mounted to the spindle. Spindles may also have exterior threads and/or an interior taper at their "outboard" (i.e., facing away from the bed) end, and/or may have a handwheel or other accessory mechanism on their outboard end. Spindles are powered, and impart motion to the workpiece.

The spindle is driven, either by foot power from a treadle and flywheel or by a belt or gear drive to a power source. In most modern lathes this power source is an integral electric motor, often either in the headstock, to the left of the headstock, or beneath the headstock, concealed in the stand.

In addition to the spindle and its bearings, the headstock often contains parts to convert the motor speed into various spindle speeds. Various types of speed-changing mechanism achieve this, from a cone pulley or step pulley, to a cone pulley with back gear (which is essentially a low range, similar in net effect to the two-speed rear of a truck), to an entire gear train similar to that of a manual-shift auto transmission. Some motors have electronic rheostat-type speed controls, which obviates cone pulleys or gears.

The counterpoint to the headstock is the tailstock, sometimes referred to as the loose head, as it can be positioned at any convenient point on the bed, by undoing a locking nut, sliding it to the required area, and then relocking it. The tailstock contains a barrel which does not rotate, but can slide in and out parallel to the axis of the bed, and directly in line with the headstock spindle. The barrel is hollow, and usually contains a taper to facilitate the gripping of various type of tooling. Its most common uses are to hold a hardened steel centre, which is used to support long thin shafts while turning, or to hold drill bits for drilling axial holes in the work piece. Many other uses are possible.

Metalworking lathes have a carriage (comprising a saddle and apron) topped with a cross-slide, which is a flat piece that sits crosswise on the bed, and can be cranked at right angles to the bed. Sitting atop the cross slide is usually another slide called a compound rest, which provides 2 additional axes of motion, rotary and linear. Atop that sits a toolpost, which holds a cutting tool which removes material from the workpiece. There may or may not be a leadscrew, which moves the cross-slide along the bed.

Woodturning and metal spinning lathes do not have cross-slides, but rather have banjos, which are flat pieces that sit crosswise on the bed. The position of a banjo can be adjusted by hand; no gearing is involved. Ascending vertically from the banjo is a toolpost, at the top of which is a horizontal toolrest. In woodturning, hand tools are braced against the tool rest and levered into the workpiece. In metal spinning, the further pin ascends vertically from the tool rest, and serves as a fulcrum against which tools may be levered into the workpiece.

Accessories

Unless a workpiece has a taper machined onto it which perfectly matches the internal taper in the spindle, or has threads which perfectly match the external threads on the spindle (two conditions which rarely exist), an accessory must be used to mount a workpiece to the spindle.

A workpiece may be bolted or screwed to a faceplate, a large, flat disk that mounts to the spindle. In the alternative, faceplate dogs may be used to secure the work to the faceplate.

A workpiece may be mounted on a mandrel, or circular work clamped in a three- or four-jaw chuck. For irregular shaped workpieces it is usual to use a four jaw (independent moving jaws) chuck. These holding devices mount directly to the Lathe headstock spindle.

In precision work, and in some classes of repetition work, cylindrical workpieces are usually held in a collet inserted into the spindle and secured either by a drawbar, or by a collet closing cap on the spindle. Suitable collets may also be used to mount square or hexagonal workpieces. In precision toolmaking work such collets are usually of the draw-in variety, where, as the collet is tightened, the workpiece moves slightly back into the headstock, whereas for most repetition work the dead length variety is preferred, as this ensures that the position of the workpiece does not move as the collet is tightened.

A soft workpiece (wooden) may be pinched between centers by using a spur drive at the headstock, which bites into the wood and imparts torque to it.

A soft dead center is used in the headstock spindle as the work rotates with the centre. Because the centre is soft it can be trued in place before use. The included angle is 60°. Traditionally, a hard dead center is used together with suitable lubricant in the tailstock to support the workpiece. In modern practice the dead center is frequently replaced by a live center, as it turns freely with the workpiece — usually on ball bearings — reducing the frictional heat, especially important at high speeds. When clear facing a long length of material it must be supported at both ends. This can be achieved by the use of a travelling or fixed steady. If a steady is not available, the end face being worked on may be supported by a dead (stationary) half centre. A half centre has a flat surface machined across a broad section of half of its diameter at the pointed end. A small section of the tip of the dead centre is retained to ensure concentricity. Lubrication must be applied at this point of contact and tail stock pressure reduced. A lathe carrier or lathe dog may also be employed when turning between two centers.

In woodturning, one variation of a live center is a cup center, which is a cone of metal surrounded by an annular ring of metal that decreases the chances of the workpiece splitting.

A circular metal plate with even spaced holes around the periphery, mounted to the spindle, is called an "index plate". It can be used to rotate the spindle to a precise angle, then lock it in place, facilitating repeated auxiliary operations done to the workpiece.

Other accessories, including items such as taper turning attachments, knurling tools, vertical slides, fixed and traveling steadies, etc., increase the versatility of a lathe and the range of work it may perform.

Modes of use

When a workpiece is fixed between the headstock and the tailstock, it is said to be "between centers". When a workpiece is supported at both ends, it is more stable, and more force may be applied to the workpiece, via tools, at a right angle to the axis of rotation, without fear that the workpiece may break loose.

When a workpiece is fixed only to the spindle at the headstock end, the work is said to be "face work". When a workpiece is supported in this manner, less force may be applied to the workpiece, via tools, at a right angle to the axis of rotation, lest the workpiece rip free. Thus, most work must be done axially, towards the headstock, or at right angles, but gently.

When a workpiece is mounted with a certain axis of rotation, worked, then remounted with a new axis of rotation, this is referred to as "eccentric turning" or "multi axis turning". The result is that various cross sections of the workpiece are rotationally symmetric, but the workpiece as a whole is not rotationally symmetric. This technique is used for camshafts, various types of chair legs.

Varieties

The smallest lathes are "jewelers lathes" or "watchmaker lathes", which are small enough that they may be held in one hand. The workpieces machined on a jeweler's lathes are metal, jeweler's lathes can be used with hand-held "graver" tools or with compound rests that attach to the lathe bed. Graver tools are generally supported by a T-rest, not fixed to a cross slide or compound rest. The work is usually held in a collet. Common spindle bore sizes are 6 mm, 8 mm and 10 mm. The term W/W refers to the Webster/Whitcomb collet and lathe, invented by the American Watch Tool Company of Waltham, Massachusetts. Most lathes commonly referred to as watchmakers lathes are of this design. In 1909, the American Watch Tool company introduced the Magnus type collet (a 10-mm body size collet) using a lathe of the same basic design, the Webster/Whitcomb Magnus. (F.W.Derbyshire, Inc. retains the trade names Webster/Whitcomb and Magnus and still produces these collets.) Two bed patterns are common: the WW (Webster Whitcomb) bed, a truncated triangular prism (found only on 8 and 10 mm watchmakers' lathes); and the continental D-style bar bed (used on both 6 mm and 8 mm lathes by firms such as Lorch and Star). Other bed designs have been used, such a triangular prism on some Boley 6.5 mm lathes, and a V-edged bed on IME's 8 mm lathes.

Smaller metalworking lathes that are larger than jewelers' lathes and can sit on a bench or table, but offer such features as tool holders and a screw-cutting gear train are called hobby lathes, and larger versions, "bench lathes". Even larger lathes offering similar features for producing or modifying individual parts are called "engine lathes". Lathes of these types do not have additional integral features for repetitive production, but rather are used for individual part production or modification as the primary role.

Lathes of this size that are designed for mass manufacture, but not offering the versatile screw-cutting capabilities of the engine or bench lathe, are referred to as "second operation" lathes.

Lathes with a very large spindle bore and a chuck on both ends of the spindle are called "oil field lathes".

Fully automatic mechanical lathes, employing cams and gear trains for controlled movement, are called screw machines.

Lathes that are controlled by a computer are CNC lathes.

Lathes with the spindle mounted in a vertical configuration, instead of horizontal configuration, are called vertical lathes or vertical boring machines. They are used where very large diameters must be turned, and the workpiece (comparatively) is not very long.

A lathe with a cylindrical tailstock that can rotate around a vertical axis, so as to present different tools towards the headstock (and the workpiece) are turret lathes.

A lathe equipped with indexing plates, profile cutters, spiral or helical guides, etc., so as to enable ornamental turning is an ornamental lathe.

Various combinations are possible: for example, a vertical lathe have CNC as well (such as a CNC VTL).

Lathes can be combined with other machine tools, such as a drill press or vertical milling machine. These are usually referred to as combination lathes.

Major categories

Woodworking lathes
Woodworking lathes are the oldest variety. All other varieties are descended from these simple lathes. An adjustable horizontal metal rail - the tool rest - between the material and the operator accommodates the positioning of shaping tools, which are usually hand-held. With wood, it is common practice to press and slide sandpaper against the still-spinning object after shaping to smooth the surface made with the metal shaping tools.

There are also woodworking lathes for making bowls and plates, which have no horizontal metal rail, as the bowl or plate needs only to be held by one side from a metal face plate. Without this rail, there is very little restriction to the width of the piece being turned. Further detail can be found on the woodturning page.

Metalworking lathes
In a metalworking lathe, metal is removed from the workpiece using a hardened cutting tool, which is usually fixed to a solid moveable mounting, either a toolpost or a turret, which is then moved against the workpiece using handwheels and/or computer controlled motors. These (cutting) tools come in a wide range of sizes and shapes depending upon their application. Some common styles are diamond, round, square and triangular.

The toolpost is operated by leadscrews that can accurately position the tool in a variety of planes. The toolpost may be driven manually or automatically to produce the roughing and finishing cuts required to turn the workpiece to the desired shape and dimensions, or for cutting threads, worm gears, etc. Cutting fluid may also be pumped to the cutting site to provide cooling, lubrication and clearing of swarf from the workpiece. Some lathes may be operated under control of a computer for mass production of parts (see "Computer Numerical Control").

Manually controlled metalworking lathes are commonly provided with a variable ratio gear train to drive the main leadscrew. This enables different thread pitches to be cut. On some older lathes or more affordable new lathes, the gear trains are changed by swapping gears with various numbers of teeth onto or off of the shafts, while more modern or expensive manually controlled lathes have a quick change box to provide commonly used ratios by the operation of a lever. CNC lathes use computers and servomechanisms to regulate the rates of movement.

On manually controlled lathes, the thread pitches that can be cut are, in some ways, determined by the pitch of the leadscrew: A lathe with a metric leadscrew will readily cut metric threads (including BA), while one with an imperial leadscrew will readily cut imperial unit based threads such as BSW or UTS (UNF,UNC). This limitation is not insurmountable, because a 127-tooth gear, called a transposing gear, is used to translate between metric and inch thread pitches. However, this is optional equipment that many lathe owners do not own. It is also a larger changewheel than the others, and on some lathes may be larger than the changewheel mounting banjo is capable of mounting.

The workpiece may be supported between a pair of points called centres, or it may be bolted to a faceplate or held in a chuck. A chuck has movable jaws that can grip the workpiece securely.

There are some effects on material properties when using a metalworking lathe. There are few chemical or physical effects, but there are many mechanical effects, which include residual stress, microcracks, workhardening, and tempering in hardened materials.

Cue lathes

Cue lathes function similar to turning and spinning lathes allowing for a perfectly radially-symmetrical cut for billiard cues. They can also be used to refinish cues that have been worn over the years.

Glassworking lathes

Glassworking lathes are similar in design to other lathes, but differ markedly in how the workpiece is modified. Glassworking lathes slowly rotate a hollow glass vessel over a fixed or variable temperature flame. The source of the flame may be either hand-held, or mounted to a banjo/cross slide that can be moved along the lathe bed. The flame serves to soften the glass being worked, so that the glass in a specific area of the workpiece becomes malleable, and subject to forming either by inflation ("glassblowing"), or by deformation with a heat resistant tool. Such lathes usually have two headstocks with chucks holding the work, arranged so that they both rotate together in unison. Air can be introduced through the headstock chuck spindle for glassblowing. The tools to deform the glass and tubes to blow (inflate) the glass are usually handheld.

In diamond turning, a computer-controlled lathe with a diamond-tipped tool is used to make precision optical surfaces in glass or other optical materials. Unlike conventional optical grinding, complex aspheric surfaces can be machined easily. Instead of the dovetailed ways used on the tool slide of a metal turning lathe, the ways typically float on air bearings and the position of the tool is measured by optical interferometry to achieve the necessary standard of precision for optical work. The finished work piece usually requires a small amount subsequent polishing by conventional techniques to achieve a finished surface suitably smooth for use in a lens, but the rough grinding time is significantly reduced for complex lenses.

Metal spinning lathes
Metal spinning

In metal spinning, a disk of sheet metal is held perpendicularly to the main axis of the lathe, and tools with polished tips (spoons) are hand held, but levered by hand against fixed posts, to develop large amounts of torque/pressure that deform the spinning sheet of metal.

Metal spinning lathes are almost as simple as woodturning lathes (and, at this point, lathes being used for metal spinning almost always are woodworking lathes). Typically, metal spinning lathes require a user-supplied rotationally symmetric mandrel, usually made of wood, which serves as a template onto which the workpiece is moulded (non-symmetric shapes can be done, but it is a very advanced technique). For example, if you want to make a sheet metal bowl, you need a solid chunk of wood in the shape of the bowl; if you want to make a vase, you need a solid template of a vase, etc.

Given the advent of high speed, high pressure, industrial die forming, metal spinning is less common now than it once was, but still a valuable technique for producing one-off prototypes or small batches where die forming would be uneconomical.

Ornamental turning lathes

The ornamental turning lathe was developed around the same time as the industrial screwcutting lathe in the nineteenth century. It was used not for making practical objects, but for decorative work - ornamental turning. By using accessories such as the horizontal and vertical cutting frames, eccentric chuck and elliptical chuck, solids of extraordinary complexity may be produced by various generative procedures.

A special purpose lathe, the Rose engine lathe is also used for ornamental turning, in particular for engine turning, typically in precious metals, for example to decorate pocket watch cases. As well as a wide range of accessories, these lathes usually have complex dividing arrangements to allow the exact rotation of the mandrel. Cutting is usually carried out by rotating cutters, rather than directly by the rotation of the work itself. Because of the difficulty of polishing such work, the materials turned, such as wood or ivory, are usually quite soft, and the cutter has to be exceptionally sharp. The finest ornamental lathes are generally considered to be those made by Holtzapffel around the turn of the 19th century.

Reducing lathe

Many types of lathes can be equipped with accessory components to allow them to reproduce an item: the original item is mounted on one spindle, the blank is mounted on another, and as both turn in synchronized manner, one end of an arm "reads" the original and the other end of the arm "carves" the duplicate.

A reducing lathe is a specialized lathe that is designed with this feature, and which incorporates a mechanism similar to a pantograph, so that when the "reading" end of the arm reads a detail that measures one inch (for example), the cutting end of the arm creates an analogous detail that is (for example) one quarter of an inch (a 4:1 reduction, although given appropriate machinery and appropriate settings, any reduction ratio is possible).

Reducing lathes are used in coin-making, where a plaster original (or an epoxy master made from the plaster original, or a copper shelled master made from the plaster original, etc.) is duplicated and reduced on the reducing lathe, generating a master die.

Rotary lathes

A lathe in which softwood, like spruce or pine, or hardwood, like birch, logs are turned against a very sharp blade and peeled off in one continuous or semi-continuous roll. Invented by Immanuel Nobel (father of the more famous Alfred Nobel). The first such lathes were set up in the United States in the mid-19th century. The product is called wood veneer and it is used for finishing chipboard objects and making plywood.

Watchmaker's lathes
Watchmakers lathes are delicate but precise metalworking lathes, usually without provision for screwcutting, and are still used by horologists for work such as the turning of balance shafts. A handheld tool called a graver is often used in preference to a slide mounted tool. The original watchmaker's turns was a simple dead-centre lathe with a moveable rest and two loose headstocks. The workpiece would be rotated by a bow, typically of horsehair, wrapped around it.

Machine tool dynamometer

A machine tool dynamometer is a multi-component dynamometer that is used to measure forces during the use of the machine tool. Empirical calculations of these forces can be cross-checked and verified experimentally using these machine tool dynamometers.

With advancement of technology, machine tool dynamometers are increasingly used for accurate measurement of forces and for optimization of the machining process. These multi-component forces are measured as an individual component force in each co-ordinate, depending on the co-ordinate system used. The forces during machining are dependent on depth of cut, feed rate, cutting speed, tool material and geometry, material of the work piece and other factors such as use of lubrication/cooling during machining.

Types
1) Lathe
2) Drill
3) Milling
4) Grinding

Machine tool

A machine tool is a machine, typically powered other than by human muscle (e.g., electrically, hydraulically, or via line shaft), used to make manufactured parts (components) in various ways that include cutting or certain other kinds of deformation. All machine tools involve some kind of fundamental constraining and guiding of movement provided by the parts of the machine, such that the relative movement between workpiece and cutting tool (which is called the toolpath) is controlled or constrained by the machine to at least some extent, rather than being entirely "offhand" or "freehand". Machine tools archetypically perform conventional machining or grinding on metal (that is, metal cutting by shear deformation, producing swarf), but the definition can no longer be limited to those elements, if it ever could, because other processes than machining may apply, and other workpiece materials than metal are common. The precise definition of the term varies among users, as detailed in the "Nomenclature and key concepts" section. It is safe to say that all machine tools are "machines that help people to make things", although not all factory machines are machine tools.

Nomenclature and key concepts, interrelated
Many historians of technology consider that true machine tools were born when the toolpath first became guided by the machine itself in some way, at least to some extent, so that direct, freehand human guidance of the toolpath (with hands, feet, or mouth) was no longer the only guidance used in the cutting or forming process. In this view of the definition, the term, arising at a time when all tools up till then had been hand tools, simply provided a label for "tools that were machines [instead of hand tools]". Early lathes, those prior to the late medieval period, and modern woodworking lathes and potter's wheels may or may not fall under this definition, depending on how one views the headstock spindle itself; but the earliest lathe with direct mechanical control of the cutting tool's path was a screw-cutting lathe dating to about 1483. This lathe "produced screw threads out of wood and employed a true compound slide rest".

The mechanical toolpath guidance grew out of any of various root concepts:
First is the spindle concept itself, which constraints workpiece or tool movement to rotation around a fixed axis. This ancient concept predates machine tools per se; the earliest lathes and potter's wheels incorporated it for the workpiece, but the movement of the tool itself on these machines was entirely freehand.
The machine slide, which has many forms, such as dovetail ways, box ways, or cylindrical column ways. Machine slides constrain tool or workpiece movement linearly. If a stop is added, the length of the line can also be accurately controlled. (Machine slides are essentially a subset of linear bearings, although the language used to classify these various machine elements includes connotative boundaries; some users in some contexts would contradistinguish elements in ways that others might not.)
Tracing, which involves following the contours of a model or template and transferring the resulting motion to the toolpath.
Cam operation, which is related in principle to tracing but can be a step or two removed from the traced element's matching the reproduced element's final shape. For example, several cams, no one of which directly matches the desired output shape, can actuate several vectors of the toolpath.

Abstractly programmable toolpath guidance began with mechanical solutions, such as in musical box cams and Jacquard looms. The convergence of programmable mechanical control with machine tool toolpath control was delayed many decades, in part because the programmable control methods of musical boxes and looms lacked the rigidity for machine tool toolpaths. Later, electromechanical solutions (such as servos) and soon electronic solutions (including computers) were added, leading to numerical control and computer numerical control.

When considering the difference between freehand toolpaths and machine-constrained toolpaths, the concepts of accuracy and precision, efficiency, and productivity become important in understanding why the machine-constrained option adds value. After all, humans are generally quite talented in their freehand movements; the drawings, paintings, and sculptures of artists such as Michelangelo or Leonardo da Vinci, and of countless other talented people, show that human freehand toolpath has great potential. The value that machine tools added to these human talents is in the areas of rigidity (constraining the toolpath despite thousands of newtons (pounds) of force fighting against the constraint), accuracy and precision, efficiency, and productivity. With a machine tool, toolpaths that no human muscle could constrain can be constrained; and toolpaths that are technically possible with freehand methods, but would require tremendous time and skill to execute, can instead be executed quickly and easily, even by people with little freehand talent (because the machine takes care of it). The latter aspect of machine tools is often referred to by historians of technology as "building the skill into the tool", in contrast to the toolpath-constraining skill being in the person who wields the tool. As an example, it is physically possible to make interchangeable screws, bolts, and nuts entirely with freehand toolpaths. But it is economically practical to make them only with machine tools.

In the 1930s, the U.S. National Bureau of Economic Research (NBER) referenced the definition of a machine tool as "any machine operating by other than hand power which employs a tool to work on metal".

The narrowest colloquial sense of the term reserves it only for machines that perform metal cutting—in other words, the many kinds of machining and grinding. These processes are a type of deformation that produces swarf. However, economists use a slightly broader sense that also includes metal deformation of other types that squeeze the metal into shape without cutting off swarf, such as rolling, stamping with dies, shearing, swaging, riveting, and others. Thus presses are usually included in the economic definition of machine tools. For example, this is the breadth of definition used by Max Holland in his history of Burgmaster and Houdaille, which is also a history of the machine tool industry in general from the 1940s through the 1980s; he was reflecting the sense of the term used by Houdaille itself and other firms in the industry. Many reports on machine tool export and import and similar economic topics use this broader definition.

The colloquial sense implying metal cutting is also growing obsolete because of changing technology over the decades. The many more recently developed processes labeled "machining", such as electrical discharge machining, electrochemical machining, electron beam machining, photochemical machining, and ultrasonic machining, or even plasma cutting and water jet cutting, are often performed by machines that could most logically be called machine tools. In addition, some of the newly developed additive manufacturing processes, which are not about cutting away material but rather about adding it, are done by machines that are likely to end up labeled, in some cases, as machine tools.

The natural language use of the terms varies, with subtle connotative boundaries. Many speakers resist using the term "machine tool" to refer to woodworking machinery (joiners, table saws, routing stations, and so on), but it is difficult to maintain any true logical dividing line, and therefore many speakers are fine with a broad definition. It is common to hear machinists refer to their machine tools simply as "machines". Usually the mass noun "machinery" encompasses them, but sometimes it is used to imply only those machines that are being excluded from the definition of "machine tool". This is why the machines in a food-processing plant, such as conveyors, mixers, vessels, dividers, and so on, may be labeled "machinery", while the machines in the factory's tool and die department are instead called "machine tools" in contradistinction. As for the 1930s NBER definition quoted above, one could argue that its specificity to metal is obsolete, as it is quite common today for particular lathes, milling machines, and machining centers (definitely machine tools) to work exclusively on plastic cutting jobs throughout their whole working lifespan. Thus the NBER definition above could be expanded to say "which employs a tool to work on metal or other materials of high hardness". And its specificity to "operating by other than hand power" is also problematic, as machine tools can be powered by people if appropriately set up, such as with a treadle (for a lathe) or a hand lever (for a shaper). Hand-powered shapers are clearly "the 'same thing' as shapers with electric motors except smaller", and it is trivial to power a micro lathe with a hand-cranked belt pulley instead of an electric motor. Thus one can question whether power source is truly a key distinguishing concept; but for economics purposes, the NBER's definition made sense, because most of the commercial value of the existence of machine tools comes about via those that are powered by electricity, hydraulics, and so on. Such are the vagaries of natural language and controlled vocabulary, both of which have their places in the business world.

Machinist calculator

A machinist calculator is a hand-held calculator programmed with built-in formulas making it easy and quick for machinists to establish speeds, feeds and time without guesswork or conversion charts. Formulas may include revolutions per minute (RPM), surface feet per minute (SFM), inches per minute (IPM), feed per tooth (FPT). A cut time (CT) function takes the user, step-by-step, through a calculation to determine cycle time (execution time) for a given tool motion. Other features may include a metric-English conversion function, a stop watch/timer function and a standard math calculator.

This type of calculator is useful for machinists, programmers, inspectors, estimators, supervisors, and students.

Machinist

A machinist is a person who uses machine tools to make or modify parts, primarily metal parts, a process known as machining. This is accomplished by using machine tools to cut away excess material much as a woodcarver cuts away excess wood to produce his work. In addition to metal, the parts may be made of many other kinds of materials, such as plastic or wood products. The goal of these cutting operations is to produce a part that conforms to a set of specifications, or tolerances, usually in the form of engineering drawings commonly known as blueprints.

Related occupational titles
Within the title machinist are other specialty titles that refer to specific skills that may be more highly developed to meet the needs of a particular job position. Some examples of these specialty titles are fitter, turning hand, mill hand, and grinder. Also, there are titles that are related but actually are a further development of machinist skills such as tool and die maker, tool maker, trim die maker, die sinker, patternmaker and mold maker. These latter titles are also more commonly found in specialized areas of industry.

A fitter and turner refers to a person who manufactures mechanical parts (turner) and assembles (fitter) those parts together to manufacture a mechanical device.

The role of the machinist in manufacturing
A machinist is usually called upon when a part needs to be produced from a material by cutting. Such a part may be unique or may be needed in the thousands. This could include a machinery part for a production line or anything that can be made from metal or plastic. Producing a part will often require several steps and more than one machine tool. Each machine tool plays a specific role in cutting away excess material. When large numbers of parts are needed, production planning is required to plan the most logical route using primarily computer numerically controlled (CNC) machines.

CNC machines are becoming the standard due to their speed, precision, flexibility, and reduced downtime while changing jobs. Production runs consisting of large numbers of parts are more cost effective (in a local and narrow sense) and commonly referred to as production work in the trade. Conversely, small production runs are sometimes referred to as prototype or jobbing work.

Production engineers use blueprints and engineering drawings to produce detailed specifications of the part, especially its geometry (shape), then decide on a strategy to make it. Machine tools are then configured by the machinist or toolsetter and production commences. The machinist works with the quality department to ensure the specifications are maintained in the finished product.

Materials commonly encountered by machinists
A machinist is to metal as a carpenter is to wood. The most common materials that machinists make parts from are steel, aluminum, brass, copper, and various alloys of these materials. Other less common materials such as vanadium, zinc, lead, or manganese are often used as alloying elements for the most common materials. Materials that machinists work with occasionally are plastics, rubber, glass, and wood products. Rarely, machinists also work with exotic and refractory metals. The term exotic metals is a general term describing out of the ordinary, rare or special purpose metals. A synonym might be space-age. A list of exotic metals might include, but is not limited to, titanium, beryllium, vanadium, chromium, molybdenum and tungsten, as well as special high-temperature metal alloys like Inconel or Hastelloy (sometimes called superalloys). Very often the meaning of the term suggests the need for specialized handling and/or tooling to machine them effectively.

While the foregoing were primarily the materials that a machinist would be cutting, the cutters that the machinist uses must be harder and tougher than the materials to be cut. The materials in the cutters a machinist uses are most commonly high speed steel, tungsten carbide, ceramics, Borazon, and diamond.

Machinists usually work to very small tolerances, usually within 0.010" or 0.25 mm (more commonly expressed as ±0.005" or ±0.13 mm) , and sometimes at tolerances as low as 0.0001" (0.0025 mm) for specialty operations. A machinist deals with all facets of shaping, cutting and some aspects of forming metal, except for welding, which is typically a separate trade. The operations most commonly performed by machinists are milling, drilling, turning, and grinding. There are other more specialized operations that a machinist will less frequently be called upon to perform such as honing, keyseating, lapping, and polishing, to name a few.

Tools of the machinist
The tools that a machinist is expected to be proficient with fall into 6 broad categories:
Measuring tools: The measuring tools come several basic varieties:
Comparison tools such as adjustable parallels and plain calipers,
Direct reading tools such as rules, scales, and vernier calipers,
Micrometer tools based on screw threads,
Indicator tools based on clockwork gear movements,
Electronic measuring tools based on tranducers. Many of these are digital versions of their mechanical predecessors, as with a digital caliper.
Hand tools: The hand tools are the usual complement of tools found in a complete auto mechanic's set except that auto specialty tools would be absent and some outsized tools would likely be present, such as 1 1/2" (38 mm) open end wrench.
Machine tools: The machine tools have undergone a dramatic shift in the last 20 years. Manual machines have given way to computer numerically controlled machines (CNCs). For clarity's sake a categorization based on the historical groupings will be offered. Each of these groupings has been altered by the advent of CNCs and the CNCs meld some groups and blur the lines between others. In the past, the most common machine tools fall into 4 categories:
Drilling machines, bench, floor, radial, and horizontal
Milling machines, horizontal, vertical, and boring mills
Turning machines, engine lathe, turret lathe, vertical turret lathe, vertical boring mill
Grinding machines, surface, cylindrical, centerless, universal
Workholders: The workholders may include vises, chucks, indexing accessories, pallets, specialty jigs or fixtures, and faceplates
Toolholders: The toolholders may include chucks, cutter adapters, cutter extension, tool posts, indexable turrets, box tools, quick change adapters, arbors, and collets.
Cutting tools: Cutting tools include various milling cutters such as face mills, shell mills, endmills, and form cutters; various drills, reamers, taps, countersinks, counterbores, and core drills; various turning tools, form tools, and threading tools; various grinding wheels distinguished by their geometry, bond, grit size, and compound.

DIY leather belt

Leather belts are a good craft project for those new to leather crafts. Except for being one of the less complicated craft projects, they also make good presents. Contrary to what you will believe, it is essentially quite simple to make a leather belt.
If you plan to tool or dye the leather, it is ideal to pick a plant leather. This sort is easier to work with than other kinds.

Note the width of the inside of the belt buckle. Measure the waist rim of the individual who will be dressed in the belt. The size will be that of the interior of the belt buckle and the length one foot longer than the waist circumference measurement. To ensure an even cut, employ a straight edge such as yardstick. Many folks like to round the end.

Taking the other end of the belt, fold the leather back 1 inches to make a crease. Line up a slot punch with the middle of the crease.Using a rotary or drive punch, make two rivet holes in. The holes should be inch from each side of the belt. Fold back the belt on the crease and mark where the bolt holes overlap the leather. Use a belt beveller to trim belt edges smooth. Use a leather dye to paint the belt. Bear in mind that the dye in the container may appear clearly different to the finished version. When selecting a dye, Look at finished samples to be certain you are getting the color you would like. Permit dye to dry completely, flexing the leather often in the drying process. Once dry, clean with Neat's foot oil or leather soap soap and buff dry with a clean material. Insert rivets from the inside of the belt and apply rivet caps employing a rubber mallet.

Put on the Do it yourself leather belt">belt and define where a hole is needed to ensure a close fit. Employ a rotary punch to punch a hole that is targeted from the perimeters of the belt. Working from this punched hole, punch a series of holes 1 inch apart.

Tool and Die Industry woes.

The facts are staggering and the future doesn't appear to be so bright for the Tool and Die Industry. In the last 5 years over 25% of the industries toolmakers have disappeared. In Michigan, the state that employs the largest number of these workers (about 30% of the nations tool and die makers) nearly 1/3 have vanished and expected to rise to 50% with a few years. With an unemployment rate near double the national average, Michigan is the barometer that manufacturing industry must watch.

Many factors are to blame, increased productivity due to advances in technology and outsourcing due to the global economy are the two biggest to get the blame..

Tools And Techniques For Silver Detecting

Silver detecting is a passion which begins with a little hobby. It can start only out of curiosity, but can take someone far longer. Whether a person is working on white metal detection just for fun or as a work, he/she will find these tips quite helpful.

Metal detecting is a very big subject with as many chapters as there are different metals. Whether a metal detector is new or experienced he/she needs to check out important things that can lead to more and better finds. He needs to go through various metal detectors like pin pointers, coils, digger and pouch, head phones and carry bags.

Each of these tools has its own special purpose to make detecting exciting and interesting, both for a beginner or for an experienced. They help to visualize the hidden objects hidden deep under the ground and help a detector to locate its precise size, position and depth. There is wide range of detectors each for a specific purpose, so a person needs to choose a right one for his/her own exciting experience of silver detecting.

Basic metal detectors like pin pointers and coils are most important tools because they lead to the spot of hidden metal, whether in sand or in dirt pile or under the ground. They also discriminate precious metal like silver or gold from trash to avoid gathering garbage and dust. They are designed with automatic controls for easy operation.

A beginner should know that there is hard work involved in this hobby, but it is much rewarding when done with persistence and patience. There are chances that much of the findings would return into garbage, but after that a precious finding will brighten up him. To make a trip successful, planning with tools and accessories are important as well as the person should study about where to go for hunting.

For successful hunting a head phone with a detector is required, as it helps to concentrate on vibrating sounds of the metal detector. A carry bag comes handy to put objects in and to avoid them lost. Some pouches are specially designed to carry things as well as tools like digger. All such accessories make work easier.

When worked with planning and good tools, silver detecting hobby turns profitable. Metal detectors with accessories help every way, to improve detection ratio as well as to have more fun while looking for those sparkling things safely.

Leak Detection Tools And Equipments

If you usually see moisture or water occurring around you then there is a big chance of a water leakage around you. And this can cost you a lot if not rectified immediately. But identifying exact location of them may be very tough task sometimes, as they are not visible by the naked eyes and are hidden behind the walls or floors. But now with the advancement of tools and equipments, it is become possible to do leak detection very effectively.

There are various equipments which can help in detecting the leaks:

Dish Soap:

This tool is very efficient for detecting and locating the simple leaks. It is the first choice of most of the professional plumbers, especially while installing new pipes they often use this to check for any leaks. The process of applying dish soap is very simple just you have to paint all joints with foams of dish soap. If any leak is present in the pipe then after water flows it will produce some bubbles at the particular location where exactly leak has occurred.


Pressure Gauges:

It is also a useful tool for detecting any water leak. You have to attach this tool to the outdoor faucet and make it on to check the pressure of water. Measuring the pressure will let you know that the water coming to your house is having the appropriate pressure or not. If the pressure is low than what it should be then there must be a leakage problem in your house and you must have to call some professionals for detecting and fixing it.

UV Dye and UV detecting Light:

This is also one of the very effective methods to detect leaks. Before using this method you must stop the water supply and dispense UV dye down mixture to the area which you wanted to test. After doing this again start the water supply. If any leak is present in the pipeline then dye will be pushed from the cracks and bad connections. And you can see this through the UV detection lights.

Water Detection Devices:

These kind tools are also very useful in detecting any leaks; you may use them anywhere around sump pumps, water heaters, toilets, under sinks, etc. The main procedure of this leak detection device is that whenever water comes into contact with the device it generates a sound alarm which notifies that water is leaking from your pipe.

Diamond Tools In Stone Processing Introduction

To further increase productivity, all of stone processing technology set to improve economy, in addition to improved materials and reduce waste production costs, the diamond manufacturers, machine tool manufacturers machine tool manufacturers to increase the capacity of tool matching for a large number of . The study identified the current level of production capacity of marble machines. Europe is the most efficient use of granite sawing marble production efficiency level is only equivalent to the level of processing about 4%. Generally speaking, when more than 25mm depth of cut after the granite is used for processing is unlikely because it would lead to a lot of heat overload diamond tools.

By the diamond manufacturers, diamond tool manufacturers, machine tool manufacturers, blade manufacturers a matrix composed of European partners, international organizations, the Institute began research to bring a new world of stone processing program. Focus on ways to solve the questions put, as well as technical, economic, environmental evaluation and the problem approximation. This program targets the development processing system, subsystem, so deep under the conditions to meet the needs of the depth of cut ranging from 100 ~ 300mm. It includes a highly efficient saw blade, and as a tool workpiece interfaces provide improved lubrication system to ensure long and stable work. Because this is the basic requirement of a highly automated process. Studies will take two stages:

1, laboratory tests, in order to get some basic information (material properties, cutting forces, temperature, vibration), as the machine tool should be designed to achieve the basic data must be improved.

2, the first phase of data based on machine tool components (blades agglomeration, lubrication trim system) development. The first stage, the key to the project design simulation on the use of small blades, in order to study processing power, tools, workpiece interfaces (grinding zone) temperature, and vibration characteristics. When using a small saw blade when the system characteristics and industrial applications, the actual conditions of use features to match, this is crucial. To meet this requirement, many authors put forward a variety of cutting model, the system recognized two main variables, namely, cutting speed (Vc) cutting depth (ae). Use these parameters the tool geometry information, can propose a simplified model of circular saw blade when cutting formula.
heq = aeVft / Vc

Using this formula can reproduce similar industrial application conditions of power under normal circumstances.

Sawing conditions, the temperature of deep cut measuring the cutting force.

Implementation of small-scale laboratory tests using deep-cutting, in order to generate heat cutting force measuring cutting area. This information is for the determination of large-scale production of diamond tools saw lubrication equipment forecasting process may have to bear the cutting force. Use a high strength of diamond, its size is 30/40, the number of particles per carat was 660 ± 30 . First of all, such as cutting the granite hardness of Italy, followed by cutting red granite more difficult to process in India, one of the most difficult cutting materials. Cutting test, cutting depth remains 90mm, adjust the feeding speed, temperature and cutting conditions to make the best and worst conditions 600cm2/min 100cm2/min changes between. This condition can be set to meet the industrial production 380cm2/min to 1000cm2/min productivity. Temperature measurement results obtained. As expected, with the cutting efficiency produce cutting temperature rise, but even the highest speed to produce cutting temperature remains below 200 . Dynamometer measurement processing using the normal force shear force, the maximum size of tools to saw the design specifications of development help. Wear process of diamond cutting force analysis study was determined to be within the scope of their craft to work on that section. This is to maintain even wear diamond diamond is used to adjust the exposure needed to complete the cutting height of the key material.

Requirements of deep sawing granite

Access to information based on the first stage to determine the cutting process associated with the deep processing equipment specially designed. Consider the design of diamond saw blade, check the following tools to focus on the design requirements. Tools specifications processing conditions must ensure that material removal rate reached a high exposure to match the diamond when the realization of the thickness of the wear debris. Under deep saw the situation is different from the chip thickness is too small, the main aspects of concern in that if the cutting parameters with too large, then the chip thickness will be exposed to a high degree of more than diamond. In this case, due to diamond particles show too brittle, will result in the clearance between the workpiece and the lack of binding agent, a catastrophic failure. This will cause the normal force increases, resulting in catastrophic failure of tools. Project on the other hand, focus on machine stability, lubricating power and other requirements, these will have to to deep saw the final assembly to reconsider.

Lathe Cutting Tools

Lathe tools are used to cut cylindrical materials with the use of a cutting tool. They're one of the most used machine tools. Principally, lathes are used to shape metal however they need to be shaped and can also be used for wood and other materials. Modern day lathes provide a larger variety of rotating speeds and can be used either automatically or manually.

How It Works

The material is fixed firmly onto the chuck, which is a specialized type of clamp. Once the lathe is turned on, the chuck begins to rotate. It's possible to move the table both in a vertical and in a horizontal direction with the use of handles. A tool bit is used to then cut the material.

The Types

There Are Three Main Types Of Lathe Tools:

* Engine lathe

* Turret lathe

* Special purposes lathe

Small lathes can be mounted onto a bench whereas the large type are mounted to the floor. An engine lathe is not overly large and can be transported as needed. This lathe is the most versatile of the three and can basically be used for any form of work. The remaining two lathes tend to be used for mass production.

The Components

There Are Three Main Elements That Need To Be Considered When Using Lathe Tools:

* The Rotating Speed Of The Chuck: if the rotating speed is set high, then the resulting surface is very finely finished. However, the danger is that high speeds can be dangerous, so for the initial stage, it's better to begin with a low speed.

* The Cutting Depth: the cutting depth will affect how rough the resulting surface is. For example, if the cutting depth is large, then the surface will be rougher. If you use a large depth regularly, then the life of the bit will be shortened. If you are not sure which depth to use, then it's sensible to set it at a lower value.

* Sending Speed: how fast the sending speed is will affect both the roughness of the finished surface and the processing speed. If you use a high turning speed, then the processing speed will also be high. If you use a low turning speed, then the end surface will be very smooth.

Automotive Tools and Garage Equipment

Automotive tools and garage equipment are essential for every car user and mechanic. The purchase and use of these tools and equipment not only facilitates a quick repair, but also saves money for a car owner. In addition a vehicle owner would like to visit a workshop that is well equipped to handle all their requirements.

The Variety of Automotive Tools and Garage Equipment

A wide variety of tools are available, including specialty tools designed for specific repairs. There are automotive and workshop tools for air conditioning, bearing pullers and extractors, CV joint and boot tools, car ramps, camshaft locking tools, clutch tools, flywheel tools, de-carbonising tools, compression testers, automotive hand tools, power tools, engine stands and engine support beams, just to name a few. A large number of companies also manufacture workshop and garage equipment, like electrical testers, inspection lighting, impact sockets and pneumatic tools.


Automotive Tools: Quality and Dependability

While a lot is possible because of the availability of automotive tools, it is crucial to have proper tools. Whether a home craftsman or a professional mechanic is using a tool, not having the proper tools can make the task doubly hard and time consuming. Moreover, good quality is a must. A quality tool will not break and you will not have to hurriedly find a replacement.

Tools And Implements

In some structural work, cast iron is used extensively on account of its cheapness; but for certain classes of work, cast iron is not suitable, and wrought iron is employed almost exclusively; as, for instance, the -work of elevator enclosures, light railings, lamp brackets, and work of a like character.

Ornamental wrought-iron work may be divided into two general classes; namely, that which requires to be fashioned while hot, and lighter work which is manufactured from cold materials. In each case the original material is in the same form - long bars of varying widths and thicknesses, which are worked with vise and pliers, are forged with hammer and anvil into any desired shape. The dominating feature of some designs is frequently the repetition of similar scrolls or rings; and when there are a number of these, it is necessary that they should be produced rapidly and exactly alike. In making any small scroll of light iron, the first and most important step is the forming of the small quirk, or curl, at the center, and the method and machine for doing this is shown in Figs. 32 and 33. The tool employed is of a very simple character, and consists of a fixed cam a, over which the clamp, or die, b fits closely and is pivoted at the other end; the spring c keeps the die clear of the cam, and the lever d forces it into place. In Fig. 32 the lever is thrown back to allow the clamp to be pressed open by the spring c. The bar, the end of which is to be bent, is introduced between the cam a and the clamp b. The lever is then pulled forward, and the die is forced against the cam, and the beginning of the scroll is formed. The bar is then brought around to the position shown in Fig. 33, and the first convolution of the spiral thus completed.

Fig. 33.

31. The bar is now placed in the machine shown in Fig. 34, and the remainder of the scroll is formed. This machine consists of a shaft a, on which a screw thread is cut, and over which is coiled a steel spring b. On one end of the shaft is a crank or handle, and on the other end is the disk e carrying the coil or volute f, which forms the die or pattern for the rest of the scroll. This plate and volute are detachable, so that different sizes a scrolls may be formed on the same machine.

Fig, 34.

The bar, having had the first convolution of the scroll formed as already described, is now placed in the machine, as shown at h. The lever g is pressed against it to hold it in close contact with the volute f, and the disk is revolved until the scroll has assumed the proper number of convolutions. As the shaft turns, the screw thread causes the disk to advance, and the bar h is coiled evenly in one plane, instead of conically, as might appear from the spiral on the disk. When the shaft has reached the point where the proper number of revolutions has been attained, a catch releases the nut from the screw thread, and the spring b throws the shaft and disk back to their original positions, and releases the completed scroll, which is now cut off the bar, and another one prepared in the same manner. With such appliances one man can make from 300 to 000 scrolls a day, according to their size and weight; but where only a few are required it is usual to make them almost entirely by hand, for which tools similar to those shown in Fig. 35 are used, the operation being so simple that description is not necessary.

Fig. 35.

32. As it is more economical to have special machines for the manufacture of scrolls in quantities, the same applies to the twisting of flat bars, and for this purpose the appliance shown in Fig. 30 is used. This apparatus consists of a fixed upright a, with a socket to receive the pipe b, the other end of which rests in the movable upright c. The latter is arranged to travel along the bedplate by means of a threaded shaft d, so that the length of the pipe b may be changed to suit the length of the twist required to be produced. The bar to be twisted is passed through the pipe and the slot in the lever e until in proper position, and the slotted piece f is dropped into the pocket, as shown at (b). If the length of the pipe is such that the distance between the lever and the slotted piece is of the desired length for the twist, then the bar being held at these two points and prevented from revolving independently, the lever is wound around as many times as is necessary to produce the required twist. The greater the number of turns, the closer will be the twist. The piece f is made loose and dropped into place, so that it may be easily lifted out when the twist is complete, and the finished bar drawn out without twisting it through the slot, as would be necessary if the slots were permanently fixed in each end. The pipe b merely acts as a guide to prevent the bar from bending in a lateral direction when the twist is of considerable length.

Fig. 36.

33. This machine is for making a regular twist, as shown at (c), but another form of twist in common use, especially in light grille-work, is made by giving the bar a series of half turns, as shown in Fig. 37. The bar is dropped into two slots, as shown, one of which can be adjusted by means of a long screw underneath the bedplate, so that the length of the part to be twisted may be regulated. It is then grasped between these slots by the loose clutch, and given a half turn, producing the result shown at (b). If the bar is to form a part of a sqaure grille, as shown at (c), there will be a number of these twists to each piece, and the distance from center to center must be marked out before the twisting is commenced. If the quantity required should be great, it might be advantageous to make a set of fixed pockets set to the proper centers, so that six or more turns could be made without lifting the bar. The foregoing are a few of the tools used in the manufacture of light grille-work; where, however, this class of work is produced to any great extent, there is a constant demand for new tools to meet the requirements of special conditions, but these tools cannot be bought and must be made. It would be impossible to provide for the manifold variations that are likely to occur; but, apart from these special tools, those that are here illustrated are always in demand, and supplement the general machines, such as drills, punches, lathes, etc.