Comparison of Electric Tools with Pneumatic Tools

Many professionals and DIYers prefer to use air tools, or pneumatic tools, over power tools because it has simplified the jobs that once required strenuous physical labor. Building homes, painting houses and working on automobiles with pneumatic tools is increasingly more common, since air tools are quicker, more reliable, efficient, powerful and yet cheaper and safer to operate and maintain than their electric power tool counterparts.

Pneumatic tools also provide a higher power to weight ratio, so a smaller, lighter tool can accomplish the same task as a big, bulky power tool. The higher torque and higher RPM in air tools helps get the job done quickly. Whether you are a carpenter, a mechanic, a plumber, air tools can help make your job easier and faster to accomplish

Pneumatic series consists of:

Pneumatic / Air Compressor
Pneumatic Actuators
Pneumatic Control Components
Pneumatic Sensing Element and Conversion Components
Pneumatic Accessories

Comparison of Electric Tools with Pneumatic Tools!

Both of which give a range of different ways of working, for example: rotating, reciprocating, swing, impact and soon.
Regulate the velocity and output power modification easy. Through the supply valve handling process and adjustment of power valve can be very simple manner.
Pneumatic tools in the speed assortment can provide more intensity of options, ranging from 100rpm to 70000rpm.
The ratio by weight volume of output control. In the case of the same power output, compared with a small light-weight power tools.
No fever, and overload faults. Pneumatic tools more suitable for working lengthy hours without eagerness incident, and the overload phenomenon occurs even if the compressed air engine, the tool only stops once the overload phenomenon is lifted to resume normal operation, no effect on the tools, nor any fault occurs.
In the reciprocating motion, the pneumatic tools used in the piston movement, and power tools through the cam conversion, compared to pneumatic tools an advantage.
Water resistance strong. Although flooding tool harmful, but not as fatal as power tools hazards. And because no spark, so even a possibility of explosion in the use of fire explosion will not occur may be more applicable to coal, oil and other posts to use.
Pneumatic tools in a variety of bad or poor working environment, but must do maintenance work (dust, in addition to water, fuel, etc.). Air pump air tools you can use the internal combustion engine, it is more suitable for field work, pneumatic tools can work long hours for large-scale production line. Third, the economy (a) low initial investment power tools, but long-term use of high energy consumption, and tool repair, replacement, the cost is higher.
Pneumatic tools, compressed air lines need to build the initial equipment investment, but long-term use in energy consumption and lower cost of maintenance tools.
The weight of power tools pneumatic tools are generally 3-4 times, not suitable for long working hours, and pneumatic tools actually improve efficiency.

How to Use Pneumatic Tools?

Air Compressors:

Operation of air compressors requires a minimal amount of maintenance each day. Air compressors should always be run on outlets capable of continuously supplying the load that an air compressor requires.
Air compressors have release valves at the bottom of the tank. Every afternoon or after each usage, drain the air and any condensation within the tank through the release valve.
Consult the owner's manual for engine care procedures. Many require lubrication at intervals to protect the engines and compressors moving parts.
Air hoses connect the air compressor to the air tool. Always roll the air hose up by stretching the hose out lengthwise and rolling the hose into a loop.
The hose has a natural propensity to want to roll in a loop. Guide it as it tries to loop and a clean loop is accomplished.
Join the ends of the hose to make one continuous loop.

Air Tool:

Always confer with the owner manual of an air tool for individual maintenance requirements.
Lubricate the tools daily by insertion one or two drops of pneumatic tool oil into the end of the tool where the hose attaches.
Keep the guns away from the dirt as much as possible. Attach the ends of the hose to make one continuous loop. Attach the ends of the hose to make one continuous loop.
At the end of each day or use, get the gun back to its storage jug.
Always make sure appropriate operation for safety, and never direct an air tool towards another individual.