Cutting Processes

Cutting processes work by causing fracture of the material that is processed. Usually, the portion that is fractured away is in small sized pieces, called chips. Common cutting processes include sawing, shaping (or planing), broaching, drilling, grinding, turning and milling. 

Although the actual machines, tools and processes for cutting look very different from each other, the basic mechanism for causing the fracture can be understood by just a simple model called for orthogonal cutting. In all machining processes, the workpiece is a shape that can entirely cover the final part shape. The objective is to cut away the excess material and obtain the final part. This cutting usually requires to be completed in several steps – in each step, the part is held in a fixture, and the exposed portion can be accessed by the tool to machine in that portion. 

Common fixtures include vise, clamps, 3-jaw or 4-jaw chucks, etc. Each position of holding the part is called a setup. One or more cutting operations may be performed, using one or more cutting tools, in each setup. To switch from one setup to the next, we must release the part from the previous fixture, change the fixture on the machine, clamp the part in the new position on the new fixture, set the coordinates of the machine tool with respect to the new location of the part, and finally start the machining operations for this setup. Therefore, setup changes are time-consuming and expensive, and so we should try to do the entire cutting process in a minimum number of setups; the task of determining the sequence of the individual operations, grouping them into (a minimum number of) setups, and determination of the fixture used for each setup, is called process planning